Self-adhesive door and window seal installation instructions

1. First clean the surface to be cleaned, smooth, smooth and dry.

2. Measure the height of the door and window. At this height, cut off the seal with scissors.

3. Uncover the small piece of back protection paper, install the sealing strip to the correct part and press it tightly, and align it with the top edge as much as possible.

4. Continue to peel off the backing protection paper so that the sealing strip extends down the frame and keep pressing. Keep in mind that it cannot be stretched.

5. Use the same procedure to install the horizontal seals, pay attention to the anastomosis at the corner joints, and do not have gaps between the joints.

6. Note: The mounting position of the sealing strip at the hinge.